Facebook Twitter LinkedIn YouTube Menu Search Arrow Right Arrow Left Arrow Down Arrow Up Home Arrow Next Arrow Previous RSS Icon Calendar Icon Warning Icon
NOTICE: EASA’s office will be closed on Friday, March 29, 2024 in observance of Good Friday.

Filter the results

  • Enter one or more words to find resources containing any of the words entered
  • Enter words or phrases between " " to find exact match

Resource categories

Resource Library

Fundamentos de Reparación Mecánica de Motores Eléctricos

  • March 2022
  • Number of views: 14635
  • Article rating: 4.0
Book

En toda reparación mecánica, la capacidad para desmontar, reparar y volver a montar el motor de forma apropiada sin dañar innecesariamente ninguna de sus piezas es fundamental.

Esta obra contiene muchas sugerencias sobre el manejo apropiado de las diferentes partes de un motor para minimizar los daños durante el proceso de reparación. Sin embargo, es imposible desarrollar un listado que las incluya todas.

En cambio, el principio básico de tomarse el tiempo para usar la herramienta adecuada y por lo general el procedimiento apropiado guiará a los técnicos por el camino correcto.

Evaluating Noise in Electric Motors

  • October 2021
  • Number of views: 11697
  • Article rating: 5.0
FREE for Members of EASA
Webinar recording

Determining the source of noise in a motor is often much more challenging than correcting it. However, a methodical approach to investigating the noise can narrow down the possible causes.

Vertical Motor Operation and Repair

  • June 2020
  • Number of views: 16779
  • Article rating: 5.0
FREE for Members of EASA
Convention presentation

Vertical motors differ from horizontal motors in numerous ways, yet some view them as “just a horizontal motor turned on end.” The obvious differences are the (usually) thrust bearings, with arrangements varying from single- to three-thrust bearings with different orientations suited for specific load, rpm and applications. Less obvious differences are in the ventilation arrangements, shaft stiffness, degrees of protection and runout tolerances. This recording will cover those topics.

Principles of Medium & Large AC Motors, 1st Edition - IEC

  • February 2020
  • Number of views: 53261
  • Article rating: 4.2
Book

This manual covers horizontal and vertical squirrel-cage induction motors in the 300 to 5,000 horsepower range, low- and medium-voltage. Most of the principles covered apply to other sizes as well. This manual focuses primarily on IEC motors and standards.

Know your degree-of-protection codes

What level of protection do your machine enclosures offer? Here's a guide.

  • January 2019
  • Number of views: 13378
  • Article rating: No rating
Trade press article — Plant Services

The International Electrotechnical Commission (IEC) standard 60529, “Degrees of protection provided by enclosures (IP code),” addresses the degrees of protection for electrical machines (motors and generators). The “IP” acronym means “international protection” but is sometimes referred to as “ingress protection.” The IP code is commonly displayed on the nameplates of metric machines that are manufactured to IEC standards.

Electrical machine enclosures: Degree of protection (IP) codes

  • December 2017
  • Number of views: 13960
  • Article rating: 4.0
Article

The International Electrotechnical Commission (IEC) standard 60529 “Degrees of protection provided by enclosures (IP code)” addresses the degrees of protection for electrical machines (motors and generators). The “IP” acronym means “International Protection,” but is sometimes referred to as “Ingress Protection.” The IP code is commonly displayed on metric machine nameplates, which are manufactured to IEC standards.

The NEMA MG1 Motors and Generators standards have adopted the IEC standards for the IP designations. Although not prevalent on NEMA machine nameplates, the inclusion of the IP marking is becoming more common. The purpose of this article is to describe the IP code designations and provide examples of the IP codes for common electrical machine enclosures.

Encerramientos de las máquinas eléctricas: Grados de protección (Códigos IP)

  • December 2017
  • Number of views: 14899
  • Article rating: No rating
Article

La norma 60529 de la International Electrotechnical Commission (IEC): “Degrees of protection provided by enclosures (IP code)” trata los grados de protección de las máquinas eléctricas (motores y generadores). La sigla “IP” significa “Protección Internacional” pero a veces se le conoce como “Protección contra Ingreso”. El código IP se muestra comúnmente en las placas de datos de las máquinas métricas, que son fabricadas con normas IEC. 

Las normas NEMA MG1 Motors and Generators han adoptado las normas IEC para las designaciones IP. Aunque no prevalecen en las placas de datos de las máquinas NEMA, la inclusión del marcado IP se está volviendo más común. El propósito de este artículo es describir las designaciones IP y proporcionar ejemplos de los códigos IP para los encerramientos de las máquinas eléctricas más comunes.

Consider this aluminum frame motor burnout method

  • March 2017
  • Number of views: 8869
  • Article rating: 5.0
Article

When a modern temperature controlled (i.e., controlled pyrolysis) burnout oven is not available, the process described here can be used to burn out aluminum frame motors.

Considere este método para quemar un motor con carcasa de aluminio

  • March 2017
  • Number of views: 7146
  • Article rating: No rating
Article

El método aquí descrito se puede utilizar para procesar motores con carcasa de aluminio cuando no se tenga un horno moderno de quemado con temperatura controlada (es decir de pirolisis controlada). 

Working with large motor frames: Special care in handling required to avoid damage

  • August 2009
  • Number of views: 8035
  • Article rating: No rating
Article

Due to economies of scale, the use of cast iron is a popular choice in the manufacturing of NEMA and IEC frames. Cast iron is robust and easily machined. It is dimensionally stable and transfers heat well. However, foundry work is an energy-intense process, not well-suited to limited production runs. For larger electric motors, which are manufactured in smaller quantities, the frame is more often fabricated from steel. You may have heard various nicknames for this type of construction: "shoe-box," "skeleton frame," "bathtubs" or other terms. Those who work on these motors regularly know that the frame requires care in handling, especially those fitted with sleeve bearings.

Getting The Most From Your Electric Motors

Getting The Most From Your Electric Motors - coverThis 40-page booklet provides great advice for obtaining the longest, most efficient and cost-effective operation from general and definite purpose electric motors.

This booklet covers topics such as:

  • Installation, startup and baseline information
  • Operational monitoring and maintenance
  • Motor and baseline installation data
  • How to read a motor nameplate
  • Motor storage recommendations

LEARN MORE AND DOWNLOAD MÁS INFORMACIÓN Y DESCARGAR BUY PRINTED COPIES

READ MORE ABOUT THE FEATURES AND BENEFITS

EASA/AEMT Rewind Study

EASA Rewind Study cover

The Effect of Repair/Rewinding on Premium Efficiency/IE3 Motors
Tests prove Premium Efficiency/IE3 Motors can be rewound without degrading efficiency.

DOWNLOAD THE FULL RESULTS

ANSI/EASA AR100-2020

ANSI/EASA AR100-2015 cover

Recommended Practice for the Repair of Rotating Electrical Apparatus
This is a must-have guide to the repair of rotating electrical machines. Its purpose is to establish recommended practices in each step of the rotating electrical apparatus rewinding and rebuilding processes.

DOWNLOAD - ENGLISH

DESCARGAR - ESPAÑOL

EASA Technical Manual

EASA Technical Manual cover

Revised September 2022
The EASA Technical Manual is the association's definitive and most complete publication. It's available FREE to members in an online format. Members can also download PDFs of the entire manual or individual sections.

VIEW & DOWNLOAD