Facebook Twitter LinkedIn YouTube Menu Search Arrow Right Arrow Left Arrow Down Arrow Up Home Arrow Next Arrow Previous RSS Icon Calendar Icon Warning Icon
NOTICE: EASA’s office will be closed on Friday, March 29, 2024 in observance of Good Friday.

Filter the results

  • Enter one or more words to find resources containing any of the words entered
  • Enter words or phrases between " " to find exact match

Resource Library

Article

Test Running Wound Rotor Motors

  • July 2009
  • Number of views: 5650
  • Article rating: 5.0

The first step in test running a wound rotor motor is to apply approximately half-rated voltage to the stator, with the rotor circuit open (leads open or brushes lifted).

Check the rotor ring-to-ring voltage. It should also be approximately half-rated rotor voltage. Typically it will be slightly higher than the ratio of rated stator to rotor volts.

For example, if the stator is rated 460 volts and the rotor 300 volts, with 230 volts applied to the stator, the open circuit rotor voltage should be about 157-160 volts.

With the rotor open and energized for the above test, the rotor may “crawl” or most often will remain stationary.

If the rotor immediately accelerates to speed when the stator is energized, the rotor is either shorted or misconnected internally (or the rotor has an unusually high number of parallel circuits).

To test run the motor, short the rotor ring leads and apply reduced voltage to the stator. If the rotor remains stationary, disconnect power to the stator.

Next, hand-rotate (spin) the rotor and energize the stator with the rotor rotating. It should then start.

The reason that the wound rotor may tend to lock-up or not rotate (i.e., cog) is that the stator-rotor slot combination makes it sensitive to rotor position.

In many cases, simply slightly rotating the rotor will allow it to start.



Print


PREVIOUS ITEM
Comments are only visible to subscribers.

Getting The Most From Your Electric Motors

Getting The Most From Your Electric Motors - coverThis 40-page booklet provides great advice for obtaining the longest, most efficient and cost-effective operation from general and definite purpose electric motors.

This booklet covers topics such as:

  • Installation, startup and baseline information
  • Operational monitoring and maintenance
  • Motor and baseline installation data
  • How to read a motor nameplate
  • Motor storage recommendations

LEARN MORE AND DOWNLOAD MÁS INFORMACIÓN Y DESCARGAR BUY PRINTED COPIES

READ MORE ABOUT THE FEATURES AND BENEFITS

EASA/AEMT Rewind Study

EASA Rewind Study cover

The Effect of Repair/Rewinding on Premium Efficiency/IE3 Motors
Tests prove Premium Efficiency/IE3 Motors can be rewound without degrading efficiency.

DOWNLOAD THE FULL RESULTS

ANSI/EASA AR100-2020

ANSI/EASA AR100-2015 cover

Recommended Practice for the Repair of Rotating Electrical Apparatus
This is a must-have guide to the repair of rotating electrical machines. Its purpose is to establish recommended practices in each step of the rotating electrical apparatus rewinding and rebuilding processes.

DOWNLOAD - ENGLISH

DESCARGAR - ESPAÑOL

EASA Technical Manual

EASA Technical Manual cover

Revised September 2022
The EASA Technical Manual is the association's definitive and most complete publication. It's available FREE to members in an online format. Members can also download PDFs of the entire manual or individual sections.

VIEW & DOWNLOAD